High-volume, high-speed programmes where the surface course has to hold for a full design life — and where every hour of lane closure is paid for twice.
Expressway work splits into three equipment decisions: what produces the mix, what places the surface course, and what protects it afterwards. Metong covers the second and third with plants, pavers, rollers and the surface-treatment spread — chip sealers, micro-surfacing units and distributors — that decide whether a pavement reaches its design life without a premature overlay.
For new construction the specification usually centres on a batch plant matched to the paving rate, a crawler paver with a heated screed and a compaction train of single-drum, tandem and tyre rollers. For rehabilitation, the same spread is re-ordered: miller, sweeper, distributor, paver, rollers.
Preventive sealing is where the economics change. A synchronous chip seal applied at the right binder rate on a pavement that is still sound costs a fraction of an overlay and adds years of service. The equipment has to place binder and aggregate within seconds of each other, at a rate that is measured rather than estimated — which is why the sealer, not the paver, is often the machine that decides the programme's cost per kilometre.

Highways & Expressways — field photograph

160 t/h batch plant with enclosed screening and dust emission under 20 mg/Nm³.
DLB2000Details →
120 t/h compact batch plant with multi-function connectors for recycling add-ons.
DLB-1500Details →
240 t/h modular batch plant with 3000 kg/batch mixer and baghouse dust control.
DLB3000 / DLB3000D / DLB3000HDetails →
Intelligent tri-axle sealer that sprays binder and aggregate in one pass under closed-loop control.
LMT5312TFCDetails →
Six-wheel-drive synchronous sealer with touchscreen control and video monitoring of the spray bar.
LMT5250TFCDetails →
Established synchronous sealer developed with Chang'an University for mainline surface sealing.
LMT5311TFCDetails →Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.