Synchronous chip sealers, micro-surfacing trucks, asphalt distributors, spreaders and pavement repair units — the surface-treatment layer of a road programme.
Metong built its reputation on surface treatment: sealing a road before it fails, spraying a uniform binder at the exact rate the mix design calls for, and repairing the patch instead of rebuilding the pavement. This family covers every step of that workflow, from binder distribution through aggregate spreading to crack sealing.
Every unit in this family is built on a production truck chassis and controlled from the cab. Spray rate, spread width and material ratio are set numerically and monitored while the machine works, so the result on the road matches the specification on paper — the reason these trucks are specified by road authorities rather than chosen on price alone.

Binder and aggregate applied in one pass, so the seal bonds before the binder cools. Truck-mounted and trailer configurations, with fibre options for stress absorption.

Intelligent tri-axle sealer that sprays binder and aggregate in one pass under closed-loop control.
LMT5312TFCDetails →
Six-wheel-drive synchronous sealer with touchscreen control and video monitoring of the spray bar.
LMT5250TFCDetails →
Established synchronous sealer developed with Chang'an University for mainline surface sealing.
LMT5311TFCDetails →
Compact two-axle sealer for municipal roads, rural highways and access roads.
LMT5160TFCTDetails →
Binder, fibre and aggregate in one pass, for stress-absorbing layers and high-wear surfaces.
LMT5316TFCWDetails →
Emulsion and chopped glass fibre sprayed together to form a reinforced tack coat.
LMT5315TFCWDetails →
Trailer-mounted synchronous binder sprayer and chipping spreader with 6 m³ tank and 12 m³ hopper.
LMT9350TFCDetails →Cold-mix paving units that place emulsion, aggregate, filler and water in a single continuous pass for rut filling, surface restoration and preventive sealing.

Tri-axle micro-surfacing paver for rut filling, surface restoration and preventive sealing.
LMT5310TXFDetails →
Continuous-feed micro-surfacing unit with independent hydraulic circuits for each material.
LMT5255TXFDetails →
Slurry seal truck with corrosion-resistant tanks and rear-station speed control.
LMT5256TXFDetails →
Chassis-free slurry and micro-surfacing trailer with Cummins power, 4000 L emulsion tank and 12 m3 hopper.
Trailer UnitDetails →Computer-controlled binder sprayers for hot bitumen, emulsions and modified binders, from 6 m³ truck units to 12 m³ heavy tri-axle distributors.

Truck-mounted distributor for controlled binder application, spray-bar work and surface-treatment preparation.
LMT5162GLQDetails →
Fixed-value spray bar with automatic nozzle control for predictable application rates.
LMT5251GLQDetails →
Hand-lance sprayer for patching, tack coats and work where a full spray bar will not fit.
LMT5162GLQDetails →
Heavy distributor with agitated tank and heated lines for crumb-rubber and modified binders.
LMT5251GLQDetails →
Two compact hydraulic sprayers for municipal and local-road binder distribution.
LMZ5096GLQ / LMZ5127GLQDetails →
Antiskid fog-sealing distributor with fine-atomising nozzles for emulsion surface coats.
LMT5255GLQWDetails →
Towable bitumen sprayer with 1000 or 2000 L tank, pump heating and compressed-air purge.
LSB1000 / LSB2000Details →Cement and binder spreaders for cold recycling and soil stabilization, plus self-propelled aggregate spreaders with individually controlled gates.

Cement, lime and fly-ash spreader for cold recycling and roadbed stabilization.
LMT5250FSBDetails →
Gravity-fed aggregate spreader for seal coats and surface treatment, up to 3.5 m working width.
SS-3100 / SS-3500Details →
Self-propelled chip spreader with hydraulic-mechanical control and full operator visibility.
SA3C1Details →Crack sealing, infrared repair, hot-recycling patchers and insulated hot-mix transporters that keep material workable from plant to trench.

Crack sealing and patching body on a light chassis, with heated tank and tool storage.
LMT5081TYHDetails →
Recycles milled asphalt in the unit and lays it hot, closing potholes with plant-grade material.
LMT5110TYHFQDetails →
Dongfeng 4×2 patch trucks with onboard mixing and 3-8 t/h production for on-site pavement repair.
LMT5141TYHZ / LMT5180TYHZDetails →
Walk-behind and truck-mounted crack routers and sealers for joint and crack maintenance.
Specification on requestDetails →
Infrared heaters that soften existing pavement so repairs fuse with the surrounding surface.
LMT5120TYHZDetails →
Insulated hot-mix body that holds temperature from plant to the paver.
LMT5250TYHBDetails →
Smaller insulated transporter for municipal crews and night patching.
LMT5160TYHBDetails →
Compact 4.5 m3 insulated hot-mix repair truck with hydraulic auger discharge.
LMT5120TYHBDetails →Insulated tank trucks and semi-trailers with hydraulic pumping and heating, for moving binder between plant, depot and sprayer.

Heated, insulated tri-axle tanker with hydraulic discharge pump for long-distance binder delivery.
LMT5312GLQWDetails →
Insulated heated trailers from 20,000 to 45,000 L, plus previous-generation 25 and 30 m³ transport-tank models.
LMT9200GLB / LMT9250GLB / LMT9230GLB / LMT9350GLB / LMT9450GLBDetails →Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.