Binder, fibre and aggregate in one pass, for stress-absorbing layers and high-wear surfaces.

The LMT5316TFCW is a fiber Chip Sealing Distributors and Equipment (4 in 1). It is a new variety of road maintenance equipment developed by METONE and is primarily used in the construction of road surface layers or stress absorption intermediate layer (SAMI). It effectively solves cracking in road surfaces, and extend the service life of the road.
Performance of Fiber Asphalt Chip Sealer (4 in 1) 1. Improve the tensile strength of the road above 30% 2. Improve the anti-fatigue resistance of the road more than 30% 3. Rutting resistance of the road can be increased more than 30%
The fiber Chip Sealing Distributors and Equipment (4 in 1) can be used as: 1. The stress absorbing layer between new roadbed and surface layers prevents reflection cracks. 2. It provides a wearing layer between old and new asphalt pavement, which can be used for preventive maintenance on the road. 3. Under-sealed layer of different road grades. 4. Bridge waterproof layer. 5. It also can be used for reconstruction of old cement pavement.
Specifications are model-specific and can be varied for a project. Confirm the final datasheet with engineering before ordering.
of Fiber Asphalt Chip Sealer (4 in 1)
Excellent stress absorption and dispersion capacity
Performance of Fiber Asphalt Chip Sealer (4 in 1)
Improve the tensile strength of the road above 30%
Improve the anti-fatigue resistance of the road more than 30%
Rutting resistance of the road can be increased more than 30%
The fiber Chip Sealing Distributors and Equipment (4 in 1) can be used as:
The stress absorbing layer between new roadbed and surface layers prevents reflection cracks
| Specification | Value |
|---|---|
| Model | LMT5316TFCW |
| Trade mark | METONG |
| Dimension (length/width/height mm) | 12000×2498×3730 |
| Tank volume (m 3 /density) | 6 |
| Chassis | ZZ1317N3867D1H |
| Manufacturer | SINOTRUK |
| Vehicle type | High top 8×4 rear drive |
| Working speed(km/h) | 3-4 |
| Maximum flow of asphalt pump (L/r) | 1.85 |
| Maximum spreading width (m) | 4 |
| Asphalt spreading volume (L/m 2 ) | 0.6-3.0 |
| Fiber silo capacity (m 3 ) | 4 |
| Fiber spreading width (m) | 0.1-4.0 |
| Fiber cutting length ( ㎜ ) | 30/60/120 |
| Fiber spreading volume (g/m 2 ) | 30-100 |
| Drive system | Hydraulic drive |
| Maximum pressure of hydraulic system (MPa) | 20 |
| Heat preservation way of asphalt pump | Heat transfer oil |
| Cleaning way | High pressure air cleaning and diesel cleaning |
Dimensions and capacities are model-specific and may be varied for a project. Confirm the final datasheet with engineering before ordering.

Intelligent tri-axle sealer that sprays binder and aggregate in one pass under closed-loop control.
LMT5312TFCDetails →
Six-wheel-drive synchronous sealer with touchscreen control and video monitoring of the spray bar.
LMT5250TFCDetails →
Established synchronous sealer developed with Chang'an University for mainline surface sealing.
LMT5311TFCDetails →Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.