Thermal-oil block-binder melter at 8 t/h with 20 m3 storage and 16 blocks per batch.

The KR16A block bitumen melter uses thermal oil as the heat-transfer medium to melt and dewater block or bagged bitumen while limiting aging caused by direct overheating.
The package includes a melting chamber, trolley, thermal-oil heater and electrical control system.
Specifications are model-specific and can be varied for a project. Confirm the final datasheet with engineering before ordering.
Rated melting capacity of 8 t/h at ambient temperature ≥25°C
20 m3 storage capacity
16 blocks per batch
Thermal-oil operating temperature of 180-200°C
| Specification | Value |
|---|---|
| Model | KR16A |
| Production Capacity (t/h, ambient ≥25°C) | 8 |
| Bitumen Temperature (°C) | 120-140 |
| Bitumen Block Capacity | 16 blocks/batch |
| Bitumen Storage Capacity (m3) | 20 |
| Thermal Oil Heater Capacity | 5×105 kcal/h |
| Thermal Oil Operating Temperature (°C) | 180-200 |
| Thermal Oil Heater Dimensions (L×W×H) (mm) | 5560×2300×5750 |
| Heater Operating Weight (t) | 8 |
| Bitumen Pump | YCB-25; 7.5 kW; 25 m3/h |
| Induced Draft Fan | Y5-47; 3 kW; 4070 m3/h; 890 Pa |
| Gate Winch | JM0.3; 0.75 kW; 11 m/min |
Dimensions and capacities are model-specific and may be varied for a project. Confirm the final datasheet with engineering before ordering.

Hot-oil melter and decanter that recovers drummed bitumen at 2 to 8 t/h.
DJT SeriesDetails →
Mobile modular wet-process rubber bitumen plants at 10 or 20 t/h with controlled crumb-rubber ratio.
AR10 / AR20Details →
Trailer-mounted rubber asphalt unit that follows the paving spread between sites.
AR-MDetails →Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.