Export desk · Hangzhou, China · Mon–Sat 08:30–18:00 (GMT+8) market@metongmachinery.com Direct line to engineering

Dry Vacuum Road Sweeper

Waterless vacuum sweeper for milled surfaces and cold-climate road cleaning.

ModelLMT5160TSLCategoryRoad SweepersFamilyRoad Cleaning & Special Vehicles
LMT5160TSL · Road Sweepers
Hopper Capacity (m³)
8
Chassis Model
EQ1160GL6DJ
Rated Power / Speed (kW/rpm)
121 / 2800
Engine Model
Yuchai YCY30165-60
Seating Capacity
2

The LMT5160TSL vacuum road sweeper is built on a DONGFENG truck chassis and equipped with a dry vacuum sweeping system. The dry road sweeper uses a combined dust collection process based on negative-pressure suction, gravity settling, and filtration, allowing road cleaning to be completed without water spraying.

The vacuum road sweeper is especially suitable for milled pavement cleaning and road cleaning in areas where wet sweeping is not practical, such as regions with long cold seasons. The full operating process can be controlled from inside the cab, and operators can set operating modes and working parameters through the cab-mounted touchscreen.

Specifications are model-specific and can be varied for a project. Confirm the final datasheet with engineering before ordering.

01

High-power auxiliary engine The vacuum road sweeper uses a high-power Yuchai engine as the auxiliary power unit for dry sweeping and suction operations.

02

Centrifugal fan suction system The centrifugal fan provides suction power for dry sweeping and dust collection.

03

Top-mounted filter elements The filter elements are installed from top to bottom, making them easier to remove, clean, or replace. This design helps contain dust and reduce airborne dust during normal operation.

04

Online pulse filter cleaning Equipped with an online pulse automatic cleaning function, allowing continuous sweeping until the hopper is full.

05

Left and right extension brushes Extension brushes on both sides help clean curbs, road edges, raised edges, and other hard-to-reach areas.

06

Steel-wire rear sweeping roller The rear sweeping roller uses a full steel-wire design to remove larger debris from the road surface.

07

Auger discharge system Aggregate and dust inside the hopper are discharged by auger, helping reduce dust generation during unloading.

Specifications

SpecificationValue
Overall Dimensions (L×W×H) (mm)7960×2450×3180
Hopper Capacity (m³)8
Chassis ModelEQ1160GL6DJ
Chassis ManufacturerDONGFENG
Drive Type / Cab4×2, Cab-over Engine (COE)
Tire Specifications9.00R20 16PR
Approach/Departure Angle (°)17 / 8
Rated Power / Speed (kW/rpm)121 / 2800
Fuel TypeDiesel
Engine ModelYuchai YCY30165-60
Engine TypeIn-line 4-cylinder, water-cooled, turbocharged intercooled
Seating Capacity2
Max. Driving Speed (km/h)88
Gross Vehicle Weight (GVW) (kg)16000
Curb Weight (kg)10320
Rated Payload (kg)5550
Working Speed (km/h)3–10
Max. Sweeping Width (m)3.1
Suction Sweeping Width (m)2.2
Drive SystemHydraulic
Max. Hydraulic Pressure (MPa)15
Unloading MethodAuger & Lifting

Dimensions and capacities are model-specific and may be varied for a project. Confirm the final datasheet with engineering before ordering.

Dry Vacuum Road Sweeper — LMT5160TSL
Drawing, configuration options and price on request.
Get quote
Related

Other models in this range

Applications

Where this machine is specified

Technical reference

Related buying notes

LMT5160TSL · Road SweepersGet quote
Quotation

Tell us the project, we will spec the machine.

Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.

  • Application-based selection
  • Export documents prepared before shipment
  • Commissioning guidance and spares planning
Email
market@metongmachinery.com
Office
No. 66 Shimin Street, Hangzhou, China