Deck surfaces, expansion joints and tunnel aprons need waterproofing, thin bonded layers and, above all, access to inspect what has been built.
Bridge decks are a different substrate from a road. Waterproofing membranes, tack coats and thin surfacing all depend on a uniform binder film applied at a controlled rate, and on a surface that has been cleaned properly first — which is why distributors and sweepers appear in the same specification.
Inspection access is the other half of bridge work. Metong builds truck-mounted under-bridge platforms that place an inspection basket beneath the deck without closing the carriageway above, used for structural inspection, bearing replacement and signage maintenance.
In tunnels, the constraints invert: limited headroom, ventilation that traps fumes, and night-only closures. Compact equipment — mini sealers, trailer distributors and walk-behind crack units — is what fits the space, and low-emission plant is what keeps the air inside the tunnel workable.

Bridges & Tunnels — field photograph

Truck-mounted under-bridge platform for structural inspection and maintenance access.
Specification on requestDetails →
Long-reach under-bridge access vehicle for large-span structures.
Specification on requestDetails →
Truck-mounted distributor for controlled binder application, spray-bar work and surface-treatment preparation.
LMT5162GLQDetails →
Fixed-value spray bar with automatic nozzle control for predictable application rates.
LMT5251GLQDetails →
Hand-lance sprayer for patching, tack coats and work where a full spray bar will not fit.
LMT5162GLQDetails →
Crack sealing and patching body on a light chassis, with heated tank and tool storage.
LMT5081TYHDetails →Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.