Export desk · Hangzhou, China · Mon–Sat 08:30–18:00 (GMT+8) market@metongmachinery.com Direct line to engineering

Batch or drum mix: specifying a plant for your programme

The choice is not about technology preference. It is about how many mixes you run, how often you change them, and what your specification demands.

TopicAsphalt productionAuthorMetong engineering

A batch plant weighs aggregate, dries it, screens it into hot bins, then weighs each fraction and mixes a batch. A drum plant dries and mixes continuously in a single drum. Both produce compliant asphalt; they fail in different ways and suit different programmes.

Where batch wins

Batch plants change mix design quickly and hold tight tolerances on binder and filler content. If a programme runs several mixes — a base course, a surface course, a SMA, a airfield mix — and switches between them daily, batch is the practical choice. Batch also handles high filler content and stiff modified binders more predictably, because each batch is weighed and mixed separately.

Where drum wins

Drum plants produce a single mix continuously at high rate. For a long run of one specification — a motorway surface course laid over months — drum plant output and fuel efficiency are hard to beat. They are also simpler to relocate, which matters for a contractor working across dispersed sites.

The environmental package

Emission limits now drive more plant decisions than mix design does. Enclosed screening, ducted dust collection, fabric filters and low-NOx burners are what keep a plant inside a municipal permit; retrofitting them later costs more than specifying them. Ask for the emission concentration the plant is designed to hold, and check it against the local limit, not a generic one.

Modularity and freight

A plant is shipped, not walked to site. Container-sized modules cut ocean freight and simplify assembly, and they let a contractor buy the tower now and add the recycling module, the filler silo or the finished-product storage when the programme justifies it. Check the module dimensions against a 40-foot container before committing to a layout.

What to ask a supplier

Rated output at standard conditions, batching accuracy by material, installed power and transformer requirement, emission concentration, fuel consumption per tonne of mix, and the module weights. A supplier who cannot state these numerically is not quoting a plant — they are quoting a picture.

Metong engineering · Asphalt production · 7 min read

Discuss this specification with engineering

Batch or drum mix: specifying a plant for your programme

Asphalt production · 7 min read

Continue

Other notes

Quotation

Tell us the project, we will spec the machine.

Send the application, the material and the output you need. You will get a configuration proposal with capacity, chassis options and delivery window — not a catalogue page.

  • Application-based selection
  • Export documents prepared before shipment
  • Commissioning guidance and spares planning
Email
market@metongmachinery.com
Office
No. 66 Shimin Street, Hangzhou, China
Export desk · direct line to engineering Request a quotation